Materials
Substrate compatibility — aluminum alloys, fasteners, paints, coatings.
Aerospace Fasteners in Structural Applications
30 Encyclopedia of Aluminum and Its Alloys, First Edition Copyright © 2018 by Taylor & Francis. All rights reserved. Aerospace Fasteners: Use in Structural Applications George Nadim Melhem School of Materials Science and Engineering, University of New South Wales, Sydney, NSW 2052 Australia: Perfect Engineering Pty…
fastenersrivetsstructuralAluminum Materials — Aerospace Applications
Citation: Deng, J.; Zhao, G.; Lei, J.; Zhong, L.; Lei, Z. Research Progress and Challenges in Laser-Controlled Cleaning of Aluminum Alloy Surfaces. Materials 2022, 15, 5469. https://doi.org/10.3390/ ma15165469 Academic Editor: Beat Neuenschwander Received: 26 May 2022 Accepted: 3 August 2022 Published: 9 August 2022…
aluminumalloysaerospaceCorrosion and Wear Performance of Aircraft Skin After Laser Cleaning
Corrosion and Wear Performance of Aircraft Skin after Laser Cleaning Guodong Zhu a, Shouren Wang a, *, Wei Cheng b, Yuan Ren b, Daosheng Wen a a School of Mechanical Engineering, University of Jinan, Jinan 250022, China b Qilu University of Technology (Shandong Academy of Sciences), Jinan250014, China *Corresponding…
corrosionwearaluminumresearchHow Laser Paint Removal Changes Aluminum Alloy Microstructure
How Does Laser Paint Removal Change the Microstructure of Aluminum Alloys? What is the effect of paint removal by laser cleaning on the mechanical and microstructural characteristics of aluminum alloy, especially on aircraft skins? Image Credit: Javier Ruiz/Shutterstock.com The Importance of Cleaning Rusted Surfaces…
paint-removalaluminummicrostructureresearchOptimization of Substrate Performance Under Laser Cleaning
4. Optimization of Substrate Performance When utilizing a laser to remove the oxide film or paint layer from an aluminum alloy surface, a controlled cleaning can be achieved by adjusting the laser process parameters, such as laser beam power, energy density, and scanning speed. Interestingly, optimizing the laser…
substrateoptimizationresearchTextron Examination of Laser Ablation Cleaned Samples
Textron Aviation FP-300 FeatherPulse Tests “We have completed our examination and are currently finalizing the conclusions. I will share good news and say we did not observe any damage of the alclad layer on the thin aluminum that had been ablated with the laser.” (see attached image). Materials and Processing…
textronvalidationexaminationthird-party